Categories /
Accessories
 |
Silicone pressure roller
|
Art no: 2974-40 |
|
Sievert silicone roller comes in 40 mm. Non-stick, heat resistant surface with a 5”
wood handle for single-ply roofing membranes.
|
|
|
|
Additional weight
|
Art no: 2993-01 |
|
Additional weight for adding pressure when welding special demanding material.
|
|
|
| Product Data |
| 9 lbs additional weight |
|
|
Canvas Carrying Bag
|
Art no: 5013-90 |
|
13" canvas bag for Sievert ProMatic torches and hot air welders. Contains o-rings for shoulder strap.
|
|
|
|
Canvas Carrying Bag
|
Art no: 5036-90 |
|
36" canvas bag for Sievert ProMatic torches.
|
|
|
|
Wind shield
|
Art no: 7081-21 |
|
Flat nozzle
|
Art no: 7169-41 |
| Product Data |
| 2.2” wide x 0.5” opening |
|
|
Replacement kit
|
Art no: 7990-05 |
|
Replacement kit for 2" welding seams. Complete kit including nozzle and welding belt.
|
|
|
|
Welding belt
|
Art no: 7990-10 |
|
A 6” wide silicone belt designed for the TW 5000. Designed to help eliminate wrinkles and offer more welding stability.
|
|
|
|
Welding nozzle
|
Art no: 7990-30 |
|
High quality welding nozzle made of sturdy stainless steel. Designed specifically for the TW 5000.
|
|
|
| Product Data |
| Welding nozzle for single ply material |
|
|
Heating element
|
Art no: 7990-47 |
|
230 V ceramic hand-wired encapsulated heating element especially designed for the TW 5000
|
|
|
|
Transport box
|
Art no: 7990-70 |
|
Sturdy box made of steel. Footed, offering you the ability to insert forks underneath. Comes standard with exterior handles and interior straps.
|
|
|
|
Replacement kit
|
Art no: 7991-15 |
|
Replacement kit for 5” welding seams. Complete kit including special designed nozzle. 5” pressure wheel.
|
|
|
|
Welding nozzle
|
Art no: 7991-30 |
|
High quality welding nozzle made of sturdy stainless steel. Designed specifically for the TW 5000.
|
|
|
| Product Data |
| Welding nozzle for modified bitumen |
|
|
Commercial power cord
|
Art no: G100 |
|
100 ft. Heavy Duty 10/3 gauge U/L approved water resistant power cord.
|
|
|
|
Commercial power cord w/Male and Female plug
|
Art no: G100-ASSY |
|
G100 power cord with G9451 and G2623 plugs assembled.
This power cord is assembled with all of the proper plugs to
connect the Sievert TW5000 to the Sievert G12000 generator.
Recommended for optimal performance when using the Sievert
generator.
|
|
|
|
Commercial power cord w/Female plug
|
Art no: G100-PLUG |
|
G100 power cord with G2623 plug assembled on one end. This
power cord mates up with the TW5000 and is open on the end
that will plug into the generator or outlet. Recommended when
not using a Sievert generator.
|
|
|
|
Male Plug
|
Art no: G2621 |
|
High quality twist lock plug. NEMA number L6-30P offering 30A,
250V service. 2 pole, 3 wire grounding.
|
|
|
|
Female Plug
|
Art no: G2623 |
|
High quality twist lock receptacle. NEMA number L6-30R
offering 30A, 250V service. 2 pole, 3 wire grounding.
|
|
|
|
Male Plug
|
Art no: G9451 |
|
Heavy Duty straight body plug. NEMA number 14-50P offering
50A, 125/250V service. 3 pole, 4 wire grounding.
|
|
|
|
Piezo Ignitor Kit
|
Art no: PIK-1 |
| Product Data |
| Replacement piezo ignitor kit for hot air equipment. |
|
|
Piezo Ignitor Kit with Bracket; HAK2-30 only
|
Art no: PIK-1B |
| Product Data |
| Replacement piezo ignitor kit for hot air equipment. |
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-27 |
|
Plastic Welding Nozzle for use with PS-31 B 0.4” Reduction Nozzle.
|
|
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-30 A1 |
|
20x2 mm Angle Slit Nozzle for seam sealing and lap welding.
|
|
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-30 A2 |
|
20 mm 90º Angle Nozzle for overlap welding.
|
|
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-30 B1 |
|
40x2 mm Angle Slit Nozzle for seam sealing and lap welding.
|
|
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-31 A |
|
5 mm Reduction Nozzle for precise welding and soldering.
|
|
|
|
Nozzles for PS-2001 and TH 1650
|
Art no: PS-31 B |
|
10 mm Reduction Nozzle for welding and soldering.
|
|
|
|
Heating element
|
Art no: PSHE-01 |
|
The field changeable heating element can be replaced within seconds. Each heating
element contains Smartchip™ technology which holds the elements´ specific data.
When a new heating element is installed, its parameters will automatically be
adopted by the microprocessor in the gun.
|
|
|
|
Power Cord
|
Art no: PSPC-01 |
|
If the power cord becomes damaged, it can be replaced easily without opening the
housing. For use with both PS-2001 and TH 1650.
|
|
|
|
Heating element
|
Art no: THHE-01 |
|
Same as the PSHE-01, the THHE-01 can be changed in seconds. High quality,
professionally made encapsulated ceramic heating element.
|
|
|
|
Maintenance Kit
|
Art no: TWRK-90 |
|
Maintenance and repair kit for Sievert TW 5000. Please see separate spare parts list.
|
|
|
Sievert AB • P.O. Box 1366 • SE-171 26 Solna • Sweden • Phone: +46 8 629 22 00 • Fax: +46 8 629 22 66 • E-mail: info@sievert.se
