Sievert AB - Professional tools for soldering and other heating duties

Titanium Turboroofer

Art no: 2944-90

Titanium Turboroofer One-Piece Field Torch Assembly with stand.

Product Data
Length	4.3”
Weight	7 lbs
Head Diam	2”
Flame Length	20”
Max. Capacity BTU/hr @ 28/57 PSI	175.000/300.000
Gas Consumption lbs/hr @28/57 PSI	8.8/14.7

Soldering burner

Art no: 2955-01

• Soldering iron burner for sheet metal work • Practical and sturdy design • Supplied with windshield and burner designed to give excellent wind protection • Supplied without copper bit

Product Data
Length	7.5"
Weight	13 oz
Head Diam	N/A
Flame Length	N/A
Max. Capacity BTU/hr @ 28/57 PSI	9.200
Gas Consumption lbs/hr @28/57 PSI	0.46

Turboroofer

Art no: 2960-90

2-1/2" diameter, steel construction.

Product Data
Length	5.1”
Weight	12.2 lbs
Head Diam	2.5”
Flame Length	35”
Max. Capacity BTU/hr @ 28/57 PSI	225.000/375.000
Gas Consumption lbs/hr @28/57 PSI	12.1/20.2

Hot-Air detail welder

Art no: 2981-QD

• Powerful hot-air roofing burners with totally encased flames for efficient bitumen laying when open flames are not permitted • Powerful enough to achieve the same speed of roof laying compared to open flames - and the gas consumption is much lower • The use of heat is very efficient due to the narrow and directed hot-air stream and due to the fact that one can work even close to the material • All burners can use compressed air to increase power for welding and for quick and efficient drying • Working pressure 2 and 4 bar. 50-85,000 BTU/hr; 1,500°F. Comes with Piezo ignitor, quick connect, and support stand.

Product Data
Length	16.5"
Weight	3.1 lbs
Head Diam	3.25"
Flame Length	N/A
Max. Capacity BTU/hr @ 28/57 PSI	50.000/85.000
Gas Consumption lbs/hr @28/57 PSI	2.4/4.0
Temperature °F @ Nozzle	1.500

Hot-Air lap welder

Art no: 2986-47

• Powerful hot-air roofing burners with totally encased flames for efficient bitumen laying when open flames are not permitted • Powerful enough to achieve the same speed of roof laying compared to open flames - and the gas consumption is much lower • The use of heat is very efficient due to the narrow and directed hot-air stream and due to the fact that one can work even close to the material • All burners can use compressed air to increase power for welding and for quick and efficient drying • Working pressure 2 and 4 bar. 50-85,000 BTU/hr; 1,500°F. Comes with Piezo ignitor, quick connect, and support stand.

Product Data
Length	4.9 ft
Weight	8.4 lbs
Head Diam	3.25”
Flame Length	N/A
Max. Capacity BTU/hr @ 28/57 PSI	50.000/85.000
Gas Consumption lbs/hr @28/57 PSI	2.4/4.0
Temperature °F @ Nozzle	1.500

Pin-point burner

Art no: 3333-90

• Pin-point burner with the finest flame for precision work such as gold and silver forging • Silver soldering about 615°C • Work pressure 2 bar

Product Data
Length	8.7”
Weight	6.7 oz
Head Diam	0.5
Flame Length	4.7”
Max. Capacity BTU/hr @ 28/57 PSI	2.400
Gas Consumption lbs/hr @28/57 PSI	0.12

Promatic Hot-Air burner

Art no: 3334-90

• Hot-air burners with powerful windproof hot-air streams for heat shrinking • 3349 ideal for shrinking in confined spaces and fibre optic closures • 3359 is an extra small hot-air burner incorporating a heat reflector, ideal for signal systems, traffic lights, alarm systems, marine applications, automobiles and other vehicle repairs • Work pressure 2 bar • 1,200°F. For Single Ply.

Product Data
Length	11.2”
Weight	9.9 oz
Head Diam	1.5”
Flame Length	N/A
Max. Capacity BTU/hr @ 28/57 PSI	6.100
Gas Consumption lbs/hr @28/57 PSI	0.31/NA

Soft flame burner

Art no: 3341-38

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Soft flame burner

Art no: 3341-91

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Standard burner

Art no: 3343-01

• Standard burners with brush-type flames for all kinds of soft soldering/small heating applications • Silver soldering about 615°C • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Standard burner

Art no: 3344-01

• Standard burners with brush-type flames for all kinds of soft soldering/small heating applications • Silver soldering about 615°C • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Promatic repair/detail burner

Art no: 3344-90

• Standard burners with brush-type flames for all kinds of soft soldering/small heating applications • Silver soldering about 615°C • Work pressure 2 bar, for Modified Bitumen.

Product Data
Length	8.5”
Weight	5.9 oz
Head Diam	1”
Flame Length	12”
Max. Capacity BTU/hr @ 28/57 PSI	25.500
Gas Consumption lbs/hr @28/57 PSI	1.3/NA

Soft flame burner

Art no: 3347-91

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Soft flame burner

Art no: 3348-91

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Detail power burner

Art no: 3350-02

• High capacity power burners with extremely strong and windproof flames for roofing works and for large-scale heating applications • Short burners for detail work on roofs and other heating applications such as preheating before welding and shrinking on pipelines • Long burners for field torching • Recommended work pressure 4 bar • Burner diameter 1-½"", stainless steel construction.

Product Data
Length	15"
Weight	12.4 oz
Head Diam	1.5"
Flame Length	20"
Max. Capacity BTU/hr @ 28/57 PSI	89.000/150.000
Gas Consumption lbs/hr @28/57 PSI	4.4/7.4

Field power burner

Art no: 3353-02

• High capacity power burners with extremely strong and windproof flames for roofing works and for large-scale heating applications • Short burners for detail work on roofs and other heating applications such as preheating before welding and shrinking on pipelines • Long burners for field torching • Recommended work pressure 4 bar Burner diameter 2-½"", stainless steel construction.

Product Data
Length	28"
Weight	1.4 lbs
Head Diam	2.5"
Flame Length	24"
Max. Capacity BTU/hr @ 28/57 PSI	200.000/400.000
Gas Consumption lbs/hr @28/57 PSI	10.5/17.6

Promatic field burner (with neck tube)

Art no: 3354-02

• Burner diameter 2-1/2", stainless steel construction.

Product Data
Length	22”
Weight	1.0 lbs
Head Diam	2.5”
Flame Length	24”
Max. Capacity BTU/hr @ 28/57 PSI	200.000/400.000
Gas Consumption lbs/hr @28/57 PSI	10.5/16.6

Detail power burner

Art no: 3356-02

• High capacity power burners with extremely strong and windproof flames for roofing works and for large-scale heating applications • Short burners for detail work on roofs and other heating applications such as preheating before welding and shrinking on pipelines • Long burners for field torching • Recommended work pressure 4 bar

Product Data
Length	Burner diameter 2-1/2”, stainless
Weight	15”
Head Diam	1.2 lbs
Flame Length	2.5”

Hot-air burner

Art no: 3358-90

• Hot-air burners with powerful windproof hot-air streams for heating PVC or other rubber membranes where an open flame not is suitable • Work pressure 2 bar • 1,200°F. For Single Ply.

Product Data
Length	13"
Weight	9.3 oz
Head Diam	1.25" x 0.6"
Flame Length	N/A
Max. Capacity BTU/hr @ 28/57 PSI	3.000
Gas Consumption lbs/hr @28/57 PSI	0.15/NA

Cyclone burner

Art no: 3525-03

• Cyclone flame burners are the most efficient burners for brazing and soft soldering • The rotating flame gives an even and all round heat transfer to the pipe • For direct connection to Sievert Pro handles • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Soft flame burner

Art no: 3528-90

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • For direct connection to Sievert Pro handles • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Soft flame burner

Art no: 3529-90

• Soft flame design ideal for cable work and other heat shrinking applications • Soft flame burners with sweeping, powerful yellow and blue soot-free windproof flames • Fresh air sucks in and keeps the burner head cold to minimize the risk of burning the shrink material • To heat the sleeves efficiently but still soft enough not to overheat the shrink material • For direct connection to Sievert Pro handles • Work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Standard burner

Art no: 3941-02

• Standard burners with brush-type flames for all kinds of soft soldering/small heating applications • Silver soldering about 615°C • For connection to Sievert Pro necktubes • Recommended work pressure 2 bar

Product Data
Length
Weight
Head Diam
Flame Length
Max. Capacity BTU/hr @ 28/57 PSI
Gas Consumption lbs/hr @28/57 PSI

Pin-point burner

Art no: 8702-01

• For small soft soldering jobs • Gives a precise and stable flame

Product Data
Length	5.9"
Weight	0.3lbs
Head Diam	0.6"
Flame Length	3.15"
Max. Capacity BTU/hr @ 36 PSI	1.700
Gas Consumption lbs/hr @ 36 PSI	0.1

Standard burner

Art no: 8704-01

• For soft soldering and other small heating jobs • For soft soldering and other small
heating jobs

Product Data
Length	5.9"
Weight	0.3 lbs
Head Diam	0.6"
Flame Length	5.9"
Max. Capacity BTU/hr @ 36 PSI	4.800
Gas Consumption lbs/hr @ 36 PSI	0.24

Cyclone burner

Art no: 8706-01

• For brazing and soft soldering • Intensive and effective short flame that reaches around the pipe

Product Data
Length	7.3"
Weight	0.2 lbs
Head Diam	0.55"
Flame Length	3.95"
Max. Capacity BTU/hr @ 36 PSI	8.500
Gas Consumption lbs/hr @ 36 PSI	0.43

Hot-air burner

Art no: 8708-01

• For shrinking and paint stripping • Powerful and wind stable hot-air stream

Product Data
Length	10.2"
Weight	0.5 lbs
Head Diam	1.5"
Flame Length	N/A
Max. Capacity BTU/hr @ 36 PSI	6.500
Gas Consumption lbs/hr @ 36 PSI	0.33

Soft flame burner

Art no: 8710-01

• For shrinking and heating jobs • Powerful and wind stable soft flame

Product Data
Length	7.4"
Weight	0.4 lbs
Head Diam	0.95"
Flame Length	8.25"
Max. Capacity BTU/hr @ 36 PSI	13.650
Gas Consumption lbs/hr @ 36 PSI	0.68

Lap welder Add-on ramp

Art no: LWR-1

Increase productivity by adding a second ramp to the 2986-47 or HAK2-30. Can be installed quickly for optimal flexibility.

Categories

Burners